Can someone explain how to read a laser setting.Here are the two laser the doctor performed on me. How do you interpret this, a breakdown would be helpful. One is ablative and one is fractional i believe.
Laser 1: Fotona SP Dynamis Laser using R11, MSP, Basic, ERYag, full beam, 4.8jouls, 12 HZ, .2mm red handpiece.
Laser 2:Starwalker laser,13.8 joules, 9x9, 9mm, 5.0 HZ, MaQx, 1064nm, FS20A, 5 passes Quadruple Stacked
6 hours ago, getsmart121 said:Can someone explain how to read a laser setting.Here are the two laser the doctor performed on me. How do you interpret this, a breakdown would be helpful. One is ablative and one is fractional i believe.
Laser 1:
ERYag, full beam (Erbium:YAG fully ablative), 4.8 Joule (energy), 12Hz(frequency), 0.2mm (depth).
Laser 2:
Nd:YAG with 13.8 Joule (energy) 9x9 (treatment area),5 Hz (frequency), 1064 (light spectrum), 5 passes (went over 5 times over the same treatment area),Quadruple Stacked (stacking refers to overlapping laser pulses).
If you want more info, take a look at the following article and you should have a pretty decent understanding of the settings: https://bit.ly/3glMkOA
5 hours ago, Sirius Lee said:Laser 1:
ERYag, full beam (Erbium:YAG fully ablative), 4.8 Joule (energy), 12Hz(frequency), 0.2mm (depth).
Laser 2:
Nd:YAG with 13.8 Joule (energy) 9x9 (treatment area),5 Hz (frequency), 1064 (light spectrum), 5 passes (went over 5 times over the same treatment area),Quadruple Stacked (stacking refers to overlapping laser pulses).
If you want more info, take a look at the following article and you should have a pretty decent understanding of the settings: https://bit.ly/3glMkOA
Thanks Sirius.